Contents
Where it is and who can use itPayment proposal and payment daysEarly payment discount or pay on the due dateCash impactBulk payment order and approvalBank payment filePayment recordCancellation, numbering and trailPayment stops on every route for an invoice awaiting a quality decisionThe Settings tabNegative-balance approval on ProcessPayment planning: payment days, early payment discounts and bulk payment orders
It spreads open purchase invoices over the company’s weekly payment days, compares the early payment discount with paying on the due date and shows the effect of the selection on the 13-week cash forecast. A bulk payment order is prepared from the selected invoices with a single approval, a bank payment file is produced from the order, and after the bank pays the payment receipts are written with one button.
The payment order is not sent to the bank. You upload the file to your bank’s corporate online banking; until the file format is verified with your bank it carries a NOT OFFICIAL note.
Where it is and who can use it
Dock › Finance / Bank › Payment Planning. Anyone who can see bank receipts sees the proposal and the orders. Creating orders, producing files, writing payment records and changing settings and discount terms need an administrator or the bank receipt permission.
Payment proposal and payment days
The weekly payment days are chosen on the Settings tab (e.g. Tuesday and Thursday). Every open purchase invoice is placed on the nearest payment day that is not after its due date; an overdue invoice goes to the first payment day. A foreign-currency invoice is not taken into a payment order, but it is listed with its currency and its TL equivalent (e.g. 4.20 USD ≈ 150.00 TL); the Open debt, Overdue and Stopped cards are totals of the TL equivalents. Foreign-currency invoices with no rate found are not included in the totals and the screen counts them (“{adet} foreign-currency invoices have no exchange rate; they were left out of the totals.”). A supplier with no IBAN or an invalid one, and an invoice that is already in an open order, cannot be selected; the reason is written on the row. An invoice with a 3-way match difference is shown with a warning; the payment is not stopped.
Balance (VAT included). The amount in the table is the invoice’s remaining balance to pay and includes VAT (column “Balance (VAT included)”). If the invoice amount and the balance differ, the line shows “Invoice 720.00 (VAT included) · settled 120.00 (receipt, return or offset)”; that is, if a return document or receipt has partly settled the invoice, the proposal takes only the balance. The phone card shows the same two figures. The due date is the purchase invoice’s payment date (the “Due date (payment date)” field in Invoice Entry; see Document Entry › Due date on a purchase invoice); with no due date the invoice date is used.
The “incoming quality decision pending” stop. If an invoice stops in the proposal with “Invoice AF…: IR… is waiting for an incoming quality decision (goods in quarantine); it will not be taken into a payment order until the decision is made.”, the cause is the invoice’s own goods-receipt delivery note (the sentence names the delivery note’s final number). A pending record on another goods receipt of the same supplier does not stop this invoice. You give the decision in Quality › Incoming Quality; once it is made, retry the payment order.
Early payment discount or pay on the due date
In the Discount terms tab you enter days and a rate for a supplier (e.g. 2% within 10 days). If there is a payment day up to the last day of the term, the discounted amount and the discount’s annual return are calculated: rate / (100 − rate) × 360 / days between the early payment day and the due-date payment day. If the return is higher than the cost of funds in Settings the proposal is Pay early with discount, otherwise Pay on due date.
If no cost of funds is entered the system does not invent a rate: the proposal is to pay on the due date and the line shows the discount’s annual return. You can switch the discount on or off on the line yourself.
Cash impact
Whenever the selection changes the 13-week cash forecast is recalculated: the outflow of the selected invoices moves from the due-date week to the payment day and the discount is deducted. The lowest cash is shown with and without the payments side by side; a week that falls below the minimum cash buffer is flagged. If the buffer is empty in Settings, the buffer from the Financing Need setting is used.
Bulk payment order and approval
After choosing invoices, a bank account and the payment day, pressing Create payment order and send for approval prepares the order. Four-eyes is the default: the order waits for approval and a manager other than its creator approves the request. If a Payment order amount rule is defined in Management › Approvals, only orders above the threshold wait. In the individual and SME profiles, when no rule exists and the company has no second manager, the order is prepared with a single signature, the creator's approval; the screen states this clearly. Until approved no file is produced and no payment record is written. An invoice whose goods await a quality decision (in quarantine) or that was rejected in 3-way matching appears blocked in the proposal and is not added to the order. An invoice can be in only one open order at a time; its balance is re-read when the order is created. If an invoice in the order is paid outside it (Receipt Entry, bank import, cheque), the order becomes Paid by itself the next time it is opened; there is no need to wait for the payment day. If the invoice was partly paid, the order pays only the remainder.
The Users who can approve line in the order's detail names who may approve the request (managers other than the creator); if the list is empty, define a second manager first. Go to approvals takes you to Notifications and Approval › Approval inbox, where the decision is made. If the invoice was partly paid outside the order, the order amount drops to the remainder. An order that is Paid, Cancelled or Rejected has no action buttons, only Open receipts.
Bank payment file
Download file (CSV) always works: payee, IBAN, amount, description, tax number and payment date columns. For your bank’s fixed-column TXT format the template defined in HR › Payroll › Bank template is used; salary and supplier payments can share the same template. TXT generation is enabled with the banka.txt_uret gate; an overflowing field, a separator clash or a record length error stops the file. Only unpaid lines go into the file; producing the same order’s file again shows a warning.
Payment record
After the bank pays, the Write payment record button writes a bank payment receipt for each line and reduces the invoice balance; on a discounted line it also writes an account debit note for the discount and the invoice is closed. Lines the bank rejected can be excluded. Each line has its own repeat key: when an interrupted run is started again, a receipt already written is not duplicated. The payment record is not written before the payment day.
Cancellation, numbering and trail
An order with no payment record written is cancelled by writing a reason; the reason must be at least 5 characters (a shorter reason is refused and the Cancel button stays disabled). The pending approval request is closed too and the invoices can be selected again. An order with a payment record written cannot be cancelled; the receipts are reversed from the Receipt screen. Orders are not deleted and numbers are not reissued; creation, approval, file, payment record and cancellation appear in the audit trail.
Payment stops on every route for an invoice awaiting a quality decision
An invoice linked to a goods receipt whose incoming-quality decision is still pending cannot be paid by any receipt route that links to the invoice, just as in the payment order: Receipt Entry (cash, bank, credit card), the bank receipt and Bank movements › Write receipt stop at save time with 422 and this sentence: “Invoice AF…: … awaits a quality decision (goods in quarantine); no payment is made until decided. Try again once Quality › Incoming Inspection has decided.” (“Payment before the quality decision” is only the title of the administrator’s reason window.) A user with the Administrator right can write a reason of at least 5 characters in that window and choose Pay with reason; the reason goes to the action log (Audit trail). A user who is not an administrator is offered no bypass and sees the stopping sentence; if a request with a reason is sent anyway, 403 returns “Paying an invoice awaiting a quality decision requires administrator rights — Settings › Users.” For an invoice rejected in Invoice Matching there is no bypass with a reason. If the quality status cannot be read, the payment is not written (“The invoice's quality status could not be read; the payment was not recorded. Try again shortly.”).
The gate covers not only the payment order but also Receipt Entry, the bank receipt, Bank movements › Write receipt (matching the movement to an invoice), the payment-order file, the payment record and the “Pay today” routes. When a link to an invoice is sent with a bank receipt (faturaSira), the gate applies; an invoice that cannot be linked (not found, or not linkable to this receipt type) is not silently ignored — it returns 422 (“The linked invoice was not found; the receipt was not written. Choose the invoice from the list again or write it without an invoice (to the account).”). A transfer that is not tied to an invoice, or an account payment without an invoice, does not reduce the purchase invoice’s remaining balance and is not stopped by the gate; the invoice awaiting a quality decision stays open. In Bank movements › Write receipt the invoice shown in the preview is the invoice that is written: if the open invoices have changed since the preview, the program does not write the receipt and says “The match changed: open invoices changed since the preview; no receipt was written. The preview was refreshed — check the invoices and press "Write receipt" again.” (409); you check the refreshed preview and press again. In Receipt Entry and the bank receipt the value date also follows the document-date range (10 years before – 2 years after); a day that does not exist in the calendar or a year such as 9999 returns 422 and no receipt is written.
The payment day of a payment order also follows the document-date range (10 years before – 2 years after today); see Document date and due-date range. The reason of an order created with “Pay today” appears in the Audit trail.
The gate looks at the invoice the receipt is linked to, not at the receipt type: every receipt linked to a purchase invoice that is waiting for a quality decision goes through the gate — cash and bank payments, credit card and account payment receipts, the Bank movements matching and the payment order processing included — and is not written until the decision is out; the record stops with 422 and the invoice stays open. Collection-direction receipt types cannot be linked to a purchase invoice in the first place: sent with faturaSira they return 422 with “This receipt type cannot be linked to an invoice; the receipt was not written. Remove the invoice or choose a collection/payment type.” The administrator’s reasoned override follows the same rule (reason of at least 5 characters, written to the audit log; a user who is not an administrator gets 403). A payment to a purchase invoice that is not waiting for a quality decision, and a collection against a sales invoice, are written as before; offsetting a purchase return against the supplier invoice is not a payment and is not stopped by this gate.
The Settings tab
The Settings tab holds values such as the proposal horizon (1–13 weeks), the payment day and the cost of money (0–500); a value outside the range turns the field red and disables Save. Only the Administrator changes the settings; for other users the fields are read-only and state why. On the phone (Garden + Steps) Settings opens as a separate step and Save is in the bottom bar.
Negative-balance approval on Process
When you Process a payment order and the payment would take the cash or bank account negative, the “The account will go negative” window appears according to Settings › Finance policy (reason of at least 5 characters), or the action is blocked.
Related guides
- Document Entry — Issuing Quotes, Orders and InvoicesThis is the program's main writing screen: the [Save] you press here creates a real document, reduces stock and puts the customer in debt.
- Finance Module — A Guide from Scratch for Cashiers and AccountingThis guide is for someone who has never used accounting software. You know how to count money; what you will learn here is which document each movement of.
- Bank Transactions — A Guide from ScratchEvery sum that moves through the bank is a collection from a business partner, a payment to a supplier, a bank fee or a transfer between your own accounts.
- Live Bank Connection — A Guide from ScratchIf you have an agreement with your bank, you can receive account transactions directly from the bank without downloading a statement file.
- Late Payment Interest, Collection Reminders and Sales Representative CommissionA late-paid invoice creates three jobs: working out the cost of the delay and passing it on to the customer, reminding the customer of invoices that are.
- Cash simulation (what if I pay this?)The cash forecast for the next 13 weeks already exists in the reports. Cash Simulation puts a "what if I do this?" question on top of that forecast.